×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

10G-XFP-120

10G-XFP-120

0.0/5 rating (0 votes)

Description

Product Description

    10G-XFP-120 is Multi-Vendor MSA Compatible XFP (10 Gigabit Small Form Factor Pluggable Module) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 26 dB, with in most cases is enough to reach about 120 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality EML Laser transmitter with operating at nominal wavelength 1550 nm. and 1550 nm. APD Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 10G-XFP-120 operates in Standard 0°-70°C temperature range and has Double LC interface. XFP support 1.24-11.32Gbps data rate and such applications as 10G Ethernet (10.31Gbps)|Gigabit Ethernet (1.25 Gbps)|10G Fiber Channel (10.52 Gbps)|8G Fiber Channel (8.5 Gbps)|4G Fiber Channel (4.25 Gbps)|2G Fiber Channel (2.125 Gbps)|1G Fiber Channel (1.0625 Gbps)|STM-16 (2.488 Gbps)|STM-64 (9.95Gbps)|ODU0 (1.244Gbps)|ODU1 (2.498Gbps)|ODU2 (10.037Gbps)|ODU2e (10.399Gbps)|OTU1 (2.66Gbps)|OTU2 (10.70Gbps)|OTU1f (11.27Gbps)|OTU2f (11.32Gbps)|OTU1e (11.049Gbps)|OTU2e (11.095Gps). 10G-XFP-120 XFP Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Fiber To The Home aggregation and backbone, Various Data Communication 10G Ethernet & SDH/SONET/OTN Links, Data Center networking for both – Ethernet and Fiber Channel SAN Networking and other optical links.

    Transceiver is CE/RoHS certified and it is Compliant with product safety standards. 10G-XFP-120 XFP Transceiver is fully compliant to XFP mutli-source agreement (MSA) INF-8077i (Rev. 4.5, 2005). Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide XFP transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and XFP transceiver EEPROM memory data validation tests.

Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

TX Wavelength:

1550 nm.

RX Wavelenght:

1550 nm.

Minimum Optical Budget:

26 dB

Maximum Distance:

120km

Supported Data Rate:

1.24-11.32Gbps

Supported Applications:

10G Ethernet (10.31Gbps), Gigabit Ethernet (1.25 Gbps), 10G Fiber Channel (10.52 Gbps), 8G Fiber Channel (8.5 Gbps), 4G Fiber Channel (4.25 Gbps), 2G Fiber Channel (2.125 Gbps), 1G Fiber Channel (1.0625 Gbps), STM-16 (2.488 Gbps), STM-64 (9.95Gbps), ODU0 (1.244Gbps), ODU1 (2.498Gbps), ODU2 (10.037Gbps), ODU2e (10.399Gbps), OTU1 (2.66Gbps), OTU2 (10.70Gbps), OTU1f (11.27Gbps), OTU2f (11.32Gbps), OTU1e (11.049Gbps), OTU2e (11.095Gps)

DDM/DOM:

Support

Temperature Range:

Standard 0°-70°C

Connectors:

Double LC

Tx Wavelength Bandwidth:

37 nm (1528-1565 nm)

Rx Wavelength Bandwidth:

37 nm (1528-1565 nm)

Minimum Transmitting Power:

0 dB

Maximum Transmitting Power:

5 dB

Receiver Sensitivity:

-26 dBm

Receiver Overload:

-7 dBm

Dispersion:

2600-2800 ps/nm

Transmitter Type:

EML Laser

Receiver Type:

APD Photodiode

CDR (Clock and Data Recovery) chip

Supported

Power:

+3.3V single power supply

Chipset:

MAXIM, MINDSPEED, SEMTECH

Compliance:

CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8077i XFP MSA Rev.4.5, RoHS

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

ÍøÕ¾µØͼ