×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

200G-QSFP56-100

200G-QSFP56-100

0.0/5 rating (0 votes)

Description

Product Description

200G-SR4 QSFP56 is a Multi-Vendor MSA Compatible 200GBASE-SR4 QSFP56 (Quad Small Form-Factor Pluggable) Transceiver designed for operation over Multi-Mode Fiber (MMF). 200G-SR4 QSFP56 has a QSFP form factor, built in 200G PAM4 (Pulse Amplitude Modulation 4-level) DSP (Digital Signal Processor) and module supports four electrical interface lanes, which can operate in 50G PAM4 encoding mode resulting in 200G (4x50G) data rate. 200GBASE-SR4 QSFP56 module becomes handy in Data Center environments where we would need to connect multiple 200G signals from the server side (NICs) to the Data Center aggregation switch. Module has a minimum guaranteed optical budget of 1.9 dB, which in most cases is enough to reach 100 m over OM4 multimode fiber, or 70 m over OM3 multimode fiber with FEC support. However, distance is just an indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. 200G-SR4 QSFP56 uses 4 channel 53.125 Gbps VCSEL (Vertical Cavity Surface Emitting Laser) 850 nm transmitters and 4 channel 53.125 Gbps PIN 850 nm photodiode receivers. Module supports DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. 200GBASE-SR4 QSFP56 operates in the standard 0°-70°C temperature range and has an MPO/MTP-12 PC optical connector and 38 pins F-tone Networks connector for electrical interface. 200GBASE-SR4 QSFP56 supports 212.5 Gbps data rate and such applications as 200G Ethernet.

Key Technical Data
Media Type:

Multi-Mode Fiber (MMF)

Connectors:

MTP/MPO-12 PC

Supported Data Rate:

212.5 Gbps

Supported Applications:

200G Ethernet (212.5 Gbps)

Modulation

PAM4 (Pulse Amplitude Modulation 4-level)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Minimum Optical Budget:

1.9 dB

Maximum Distance:

100 m (OM4) / 70 m (OM3)

Transmitter Type:

4xVCSEL

TX Wavelength:

4×850 nm

Tx Wavelength Bandwidth:

20 nm (840-860 nm)

Receiver Type:

4xPIN

RX Wavelenght:

4×850 nm

Rx Wavelength Bandwidth:

20 nm (840-860 nm)

Average Launch Power (Min) Each Lane:

-6.5 dBm

Average Launch Power (Max) Each Lane:

4 dBm

Extinction Ratio (Min):

3 dB

Average Receiver Sensitivity (Min) Each Lane:

-8.4 dBm

Average Receiver Sensitivity (Max) Each Lane:

4 dBm

Receiver Overload:

+4dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤5W

Power:

+3.3V

Compliance:

200GAUI-4, CMIS V4.0, IEEE 802.3bs, IEEE 802.3cd, QSFP-DD MSA, RoHS-6, SFF-8679, CE

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

ÍøÕ¾µØͼ