×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

400G QSFP56 DD SR8 Optical Transceiver Module

400G QSFP56 DD SR8 Optical Transceiver Module

0.0/5 rating (0 votes)

Description

400G QSFP56 DD SR8 Optical Transceiver Module

Features

¨ 8 channels full-duplex transceiver modules                               

¨ Transmission data rate up to 53Gbps per channel                                                                                                

¨ 8x53Gbps PAM4 transmitter and PAM4 receiver                                                                                           

¨ 8 channels 850nm VCSEL array

¨ 8 channels PIN photo detector array

¨ Internal CDR circuits on both receiver and transmitter channels

¨ Power consumption <10W

¨ Hot Pluggable QSFP DD form factor and Compliant with CMIS

¨ Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC

¨ MPO24 PC connector receptacle (B version)

¨ MPO16 APC connector receptacle (C version)

¨ Built-in digital diagnostic functions

¨ 3.3V power supply voltage

¨ RoHS compliant(lead free)

¨ Case operating temperature

           Commercial:0 ~ +70¡æ

           Industrial: -40 ~ +85¡æ

Applications

¨ IEEE 802.3cd 200GBASE-SR4

Description

The F-tone NetworksFTQD-4H-SR8xx-Bis a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber with FEC. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses a MTP24/MPO24 PC connector (or MPO16/MTP16 APC connector ). The Common Management Interface Specification(CMIS) for QSFP DD modules,This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

 

Ordering information

Part Number

Product Description

FTQD-4H-SR8-B

QSFP DD, 2x200GBASE-SR4, 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF ,with DSP Power consumption <10W, MPO24(MTP24) APC connector,0ºC ~ +70ºC

FTQD-4H-SR8I-B

QSFP DD, 2x200GBASE-SR4, 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF ,with DSP Power consumption <10W, MPO24(MTP24) APC connector,-40ºC ~ +85ºC

FTQD-4H-SR8-C

QSFP DD, 2x200GBASE-SR4, 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF ,with DSP Power consumption <10W, MPO16(MTP16) APC connector,0ºC ~ +70ºC

FTQD-4H-SR8I-C

QSFP DD, 2x200GBASE-SR4, 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF ,with DSP Power consumption <10W, MPO16(MTP16) APC connector,-40ºC ~ +85ºC

 

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search

ÍøÕ¾µØͼ