×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

¼æÈݹâÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

°²»ª¸ßFiber Optics¹âÄ£¿é

°²»ª¸ßFiber Optics¹âÄ£¿é

Fiber Optics

     The Avago AFBR-7IERxxZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Cable (AOC) to 4x SFP+ Active Optical Cable break-out solution.  This “Octopus” cable is intended for 40G to 4x 10G applications.

The AFBR-7IERxxZ  is a high performance cable for short-range multi-lane data communication and interconnect applications.  It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps. These cables also support 4x10G InfiniBand QDR applications and are backward compatible to the 4x5G IB DDR and 4x2.5G IB single IB SDR applications.

°²»ª¸ßAvago SFP¹âÄ£¿é

FT AFBR-775BxxxZ/785BxxxZ

AFBR-775BxxxZ/785BxxxZ

AFBR-775BxxxZ/785BxxxZ
     The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the AFBR-775BxxxZ/785BxxxZ pluggable parallel fiber optic modules. The application note describes the details of the evaluation kit , AFBR-7705EKZ (Transmitter Board) and AFBR-7805EKZ (Receiver Board) as well as some recommended test configurations and equipment that should be used during module evaluation.

Evaluation Kit for MicroPOD12x10G, 12x12.5G and 12x14G Modules

AFBR-77EVK

 AFBR-77EVK 
 
          The Avago AFBR-77EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago MicroPOD 12x10G, 12x12.5G and 12x14G embedded optical transmitter/receiver modules. A downloadable user guide is available upon request, which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions. The evaluation kit includes the following:

FT  AFBR-7QERxxZ

AFBR-7QERxxZ

 AFBR-7QERxxZ

     The Avago AFBR-7QERxxZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Cable (AOC) solution for 40 Gigabit Ethernet Applications. The AFBR-7QERxxZ is a high performance cable for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps. These cables also support 4x10G InfiniBand QDR applications and are backward compatible to the 4x5G IB DDR and 4x2.5G IB single IB SDR applications.

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

FT  AFBR-83EVK

AFBR-83EVK

 AFBR-83EVK 

      The Avago AFBR-83EVK evaluation kit is designed to provide designers with a convenient means of evaluating the electrical and optical performance of Avago CXP and CXP AOC fiber optic transceiver modules. 

FT  AFCT-5716Z

AFCT-5716Z

 AFCT-5716Z

         The purpose of the Avago AFCT-5716Z evaluation kit is to provide designers with a convenient means of evaluating Avago SFP+ and SFP+ AOC fiber optic transceiver modules supporting 16G fiber channel (16GFC) and 10G Ethernet applications. The evaluation kit is compliant with ANSI Fibre Channel FC-PI-5 for high speed electrical and optical specifications. The AFCT-5716Z provides SMA connectors for high speed Tx and Rx signals. The low speed control signals such as Tx_Fault, Rx_LOS and Rate_Selects can be controlled by using on-board switches and test points. A connector for 2 wire serial interface to the module is also provided.

AFBR-2CARxxZ

AFBR-2CARxxZ

AFBR-2CARxxZ

×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼רҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-2CARxxZ,Avago AFBR-2CARxxZ,°²»ª¸ßAFBR-2CARxxZ¹âÄ£¿é,Avago AFBR-2CARxxZ¹âÄ£¿é,°²»ª¸ßAFBR-2CARxxZ¹âÏËÄ£¿é,Avago AFBR-2CARxxZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-2CARxxZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-2CARxxZ¹âÏËÄ£¿é £¬100%ÍêÉƼæÈÝ°²»ª¸ßAvago AFBR-2CARxxZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ £¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-2CARxxZ

AFBR-2CARxxZ

AFBR-2CARxxZ

         The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ enables 10GbE equipment designs with very high port density based on the electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF committee. The specifications are referred to as “SFP+” to represent the enhancements over previous SFP specifications. The SFP+ AOCs have a cable length up to 20m. These AOCs can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer reach, superior electromagnetic immunity and better bit error rate performance

 10G Ethernet SFP+ Active Optical Cable (AOC)

AFBR-2CARxxZ

AFBR-2CARxxZ

         The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters.

FT AFBR-7705EKZ

AFBR-7705EKZ

AFBR-7705EKZ 
        The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the AFBR-7705EKZ pluggable parallel fiber optic modules. 

AFBR-77D2SZ

AFBR-77D2SZ

AFBR-77D2SZ

×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼רҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-77D2SZ,Avago AFBR-77D2SZ,°²»ª¸ßAFBR-77D2SZ¹âÄ£¿é,Avago AFBR-77D2SZ¹âÄ£¿é,°²»ª¸ßAFBR-77D2SZ¹âÏËÄ£¿é,Avago AFBR-77D2SZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-77D2SZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-77D2SZ¹âÏËÄ£¿é £¬100%ÍêÉƼæÈÝ°²»ª¸ßAvago AFBR-77D2SZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ £¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-77EVK

AFBR-77EVK

AFBR-77EVK
      The Avago AFBR-77EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago MicroPOD  12x10G, 12x12.5G and 12x14G embedded optical transmitter/receiver modules. A downloadable user guide is available upon request

AFBR-78D2SZ

AFBR-78D2SZ

AFBR-78D2SZ

×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼רҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-78D2SZ,Avago AFBR-78D2SZ,°²»ª¸ßAFBR-78D2SZ¹âÄ£¿é,Avago AFBR-78D2SZ¹âÄ£¿é,°²»ª¸ßAFBR-78D2SZ¹âÏËÄ£¿é,Avago AFBR-78D2SZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-78D2SZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-78D2SZ¹âÏËÄ£¿é £¬100%ÍêÉƼæÈÝ°²»ª¸ßAvago AFBR-78D2SZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ £¬¹âѧ²ÎÊý¼æÈÝ¡£

AFBR-78D4SZ

AFBR-78D4SZ

AFBR-78D4SZ

×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼רҵÑб¬·¢²ú¼æÈÝ°²»ª¸ßAFBR-78D4SZ,Avago AFBR-78D4SZ,°²»ª¸ßAFBR-78D4SZ¹âÄ£¿é,Avago AFBR-78D4SZ¹âÄ£¿é,°²»ª¸ßAFBR-78D4SZ¹âÏËÄ£¿é,Avago AFBR-78D4SZ¹âÏËÄ£¿é,°²»ª¸ßAvago AFBR-78D4SZ¹âÄ£¿é,°²»ª¸ßAvago AFBR-78D4SZ¹âÏËÄ£¿é £¬100%ÍêÉƼæÈÝ°²»ª¸ßAvago AFBR-78D4SZ¹âÄ£¿é:µçÆø²ÎÊý¼æÈÝ £¬¹âѧ²ÎÊý¼æÈÝ¡£

FT AFBR-79EXBZ

AFBR-79EXBZ

AFBR-79EXBZ

         The AFBR-79EXBZ QSFP+ extender board is designed to provide access to Avago QSFP+ module's low-speed control signals while a DUT (QSFP+ compliant to INF-8436) is plugged into the target application system such as a network switch or router.

[12 3  >>  

Search

ÍøÕ¾µØͼ