×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

±ê×¼¹âÄ £¿é

±ê׼ЭÒé¹âÄ £¿é

¼æÈÝЭÒé¹âÄ £¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

BIDI-100G-QSFP28-150

BIDI-100G-QSFP28-150

0.0/5 rating (0 votes)

Description

Product Description
BIDI-100G-QSFP28-150 is Multi-Vendor MSA Compatible 100GBASE SR-BiDi QSFP28 (Quad Small Form-Factor Pluggable 28) Transceiver, operating over pair of multi-mode optical fiber providing two optical communication lanes. Module has minimum guaranteed optical budget of 1.9 dB which in most cases is enough to reach 150 meters distance over OM5 multi-mode optical cable. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. BIDI-100G-QSFP28-150 uses VSCEL laser transmitters and PIN Photodiode. Transceiver integrates four electrical data lanes in each direction at 25Gbps (NRZ modulation), which are converted to 2x50Gbps PAM4 modulation lines giving an aggregated bandwidth of 100Gbps per line. Module support DDM/DOM optical diagnostics, which provide diagnostic information about the present operating conditions. Additionally, module supports FEC (Forward Error Correction) function which will help receiving side detect and correct bit errors and improve the overall quality of the link. BIDI-100G-QSFP28-150 operates in Standard 0°-70°C temperature range and has double LC connectors.
100GBASE SR-BiDi QSFP28 support 41.25-103.125 Gbps data rate and such applications as 100G Ethernet (103.125Gbps) and 40G Ethernet (41.25Gbps). BIDI-100G-QSFP28-150 optical transceiver is designed for Data Center Applications and provides benefit to migrate from 10G to 100G data rates between switches and servers without the need to replace optical fiber infrastructure in the Datacenter.

Key Technical Data
Media Type:

Multi-Mode Fiber (MMF)

Connectors:

Double LC

TX Wavelength:

Ch1:850nm; Ch2:900nm

RX Wavelenght:

Ch1:900nm; Ch2:850nm

Minimum Optical Budget:

1.9 dB

Maximum Distance:

150m

Supported Data Rate:

41.25-103.125 Gbps

Supported Applications:

100G Ethernet (103.125Gbps), 40G Ethernet (41.25Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

VSCEL Laser

Tx Wavelength Bandwidth:

36nm (Ch1:832-868nm and Ch2: 882-918nm)

Transmit Power Per Lane (Min):

-6 dBm (100G) / -4 dBm (40G)

Receiver Type:

PIN ROSA

Rx Wavelength Bandwidth:

36nm (Ch1:832-868nm and Ch2: 882-918nm)

Average Receiver Sensitivity (Min) Each Lane:

-7.9 dBm (100G) / -6 dBm (40G)

Receiver Overload:

+4 dBm (100G) / +5 dBm (40G)

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤3.5W

Power:

+3.3V

Chipset:

Avago

Compliance:

100GBASE SR-BiDi, IEC60825-1 Laser Safety Compliant, IEEE 802.3bm, SFF-8419, CE, QSFP28 MSA, RoHS, SFF-8636

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

ÍøÕ¾µØͼ