尊龙凯时最新平台登录

标准光�？�

  2. 首页
  3. 标准光�？�
  4. BIDI SFP+
  5. BiDi SFP+ 10G 40km

标准协议光�？�

兼容协议光�？�

其它种类光器件

手艺支持

BiDi SFP+ 10G 40km

BiDi SFP+ 10G 40km

0.0/5 rating (0 votes)

Specifications

  • 产品型号: FTCS-BXX1X-40X
  • 兼容品牌: 全系列
  • 封装类型: SFP+
  • 传输速率: 10G万兆
  • 传输距离: 40KM
  • 发射波长: 1330nm/1270nm
  • 吸收波长: 1270nm/1330nm
  • 事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
  • 数字诊断: 带DDM
  • 吸收迅速度: 40KM
  • 吸收迅速度: 40KM

Description

10Gbps SFP+ Bi-Directional Transceiver, 40km Reach

1270/1330nm TX / 1330/1270 nm RX

Features

  1. Supports 9.95Gb/s to 10.3Gb/s data rates
  2. Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
  3. Single 3.3V Supply
  4. Up to 40km on 9/125um SMF
  5. A:1270nm DFB Laser transmitter,1330nm receiver
  6. B:1330nm DFB Laser transmitter,1270nm receiver
  7. Compliant with IEEE 802.3ae 10GBASE-ERand 10GBASE-EW
  8. SFP+ MSA SFF-8431 Compliant
  9. Digital Diagnostic SFF-8472 Compliant
  10. RoHS compliant and Lead Free
  11. Operating case temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)

Applications

  1. 10GBASE-ER at 10.3125Gbps
  2. 10GBASE-EW at 9.953Gbps
  3. Other Optical Links

Product description

The FTCS-BXX1X-40XX series single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ER/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability.

The FTCS-BXX1X-40XX module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.

The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Electrical characteristics(TOP = 0 to 70℃， VCC = 3.0 to 3.60 Volts)

     Parameter

Symbol

Min.

Typical

Max

Unit

Ref.

Supply Voltage

VCC

3.00

  

3.60

V

1

Supply Current

Icc

  

200

300

mA

1

Transmitter

Input differential impedance

Rin

  

100

  

Ω

2

Single ended data input swing

Vin,pp

150

  

1200

mVpp

  

Transmit Disable Voltage

VD

2

  

VCC

V

  

Transmit Enable Voltage

VEN

Vee

  

Vee+0.8

V

3

Receiver

Output differential impedance

Rout

  

100

  

Ω

2

Single ended data output swing

Vout,pp

300

  

700

mV

4

LOS Fault

VLOS fault

2

  

VCCHOST

V

5

LOS Normal

VLOS norm

Vee

  

Vee+0.8

V

5

Notes:

1. Module power consumption never exceeds 1W.

2. AC coupled.

3. Or open circuit.

4. Into 100 ohm differential termination.

5. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

Pin Descriptions

 

Pin

Symbol

Name/Description

1

VEET [1]

Transmitter Ground

2

Tx_FAULT [2]

Transmitter Fault

3

Tx_DIS   [3]

Transmitter Disable. Laser output disabled on high or open

4

SDA [2]

2-wire Serial Interface Data Line

5

SCL [2]

2-wire Serial Interface Clock Line

6

MOD_ABS [4]

Module Absent. Grounded within the module

7

RS0 [5]

RS0 for Rate Select: Open or Low = Module supports ≤4.25Gbps

High = Module supports 9.95 Gb/s to 10.3125 Gb/s

8

RX_LOS [2]

Loss of Signal indication. Logic 0 indicates normal operation

9

RS1 [5]

No connection required

10

VEER [1]

Receiver Ground

11

VEER [1]

Receiver Ground

12

RD-

Receiver Inverted DATA out. AC Coupled

13

RD+

Receiver DATA out. AC Coupled

14

VEER [1]

Receiver Ground

15

VCCR

Receiver Power Supply

16

VCCT

Transmitter Power Supply

17

VEET [1]

Transmitter Ground

18

TD+

Transmitter DATA in. AC Coupled

19

TD-

Transmitter Inverted DATA in. AC Coupled

20

VEET [1]

Transmitter Ground

Notes:

[1] Module circuit ground is isolated from module chassis ground within the module.

[2].should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.

[3]Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to VccT inside the module.

[4]Mod_ABS is connected to VeeT or VeeR in the SFP+ module. The host may pull this contact up to Vcc_Host with a resistor in the range 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+ module is physically absent from a host slot.

[5]RS0 and RS1 are module inputs and are pulled low to VeeT with > 30 kΩ resistors in the module.

订货信息/Ordering information :
 
Part No. Description
FTCS-B231X-40 1270nm/1330nm, 10Gbps, 40km,   0?C ~ +70?C
FTCS-B321X-40 1330nm/1270nm, 10Gbps, 40km,   0?C ~ +70?C
FTCS-B231X-40I 1270nm/1330nm, 10Gbps, 40km,   -40~+85℃
FTCS-B321X-40I 1330nm/1270nm, 10Gbps, 40km,   -40~+85℃

Search

网站地图