×ðÁú¿­Ê±×îÐÂƽ̨µÇ¼

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

HFBR-5961LZ

Avago HFBR-5961LZ¹âÄ£¿é

0.0/5 rating (0 votes)

Specifications

  • ²úÆ·ÐͺÅ: HFBR-5961LZ£¨Ìæ»»ÐͺÅ:FTAF-M1302-02xx£©
  • ¼æÈÝÆ·ÅÆ: °²»ª¸ßAvago
  • ·â×°ÀàÐÍ: SFF2X5
  • ´«ÊäËÙÂÊ: 155M
  • ´«Êä¾àÀë: 2KM
  • ·¢É䲨³¤: 1300nm
  • ÎüÊÕ²¨³¤: 1300nm
  • ÊÂÇéζÈ: ÉÌÒµ¼¶0¡æ¡«+70¡æ/¹¤Òµ¼¶-40¡æ¡«+85¡æ ¿ÉÑ¡
  • Êý×ÖÕï¶Ï: ²»´øDDM
  • ÎüÊÕѸËÙ¶È: Avago HFBR-5961LZ¹âÄ£¿é
  • ÎüÊÕѸËÙ¶È: Avago HFBR-5961LZ¹âÄ£¿é

Description

²úÆ·Ðͺţº(Avago:HFBR-5961LZ£¨Ìæ»»ÐͺÅ:FTAF-M1303-02xx£©)
²úÆ·ÐÎò£ºSFF2x5-1300nm-155M-3.3V-Data:LVPECL-SD:LVPECL-LC
¼æÈÝÆ·ÅÆ£ºAvago
Ô­³§ÐÎò£ºSFF2x5-1300nm-155M-3.3V-Data:LVPECL-SD:LVPECL-LC

HFBR-5961LZ/ALZ/GZ/AGZ
Multimode Small Form Factor (SFF) Transceivers for ATM, FDDI,Fast Ethernet and SONET OC-3/SDH STM-1 with LC connector
 
Features
? Multisourced 2 x 5 package style
? Operates with 62.5/125 ?m and 50/125 ?m multimode fiber
? Single +3.3 V power supply
? Wave solder and aqueous wash process compatibility
? Manufactured in an ISO 9001 certifed facility
? Full compliance with ATM Forum
? UNI SONET OC-3 multimode fber physical layer specifcation
? Full compliance with the optical performance requirements of the FDDI PMD standard
? Full compliance with the optical performance requirements of 100Base-FX version of IEEE802.3u
? RoHS compliant
? PECL Signal Detect Output
? Temperature range:
HFBR-5961LZ 0 ¡ãC to +70 ¡ãC
HFBR-5961ALZ -40 ¡ãC to +85 ¡ãC
HFBR-5961GZ 0 ¡ãC to +70¡ãC (No EMI shield)
HFBR-5961AGZ -40 ¡ãC to +85¡ãC (No EMI shield)
 
Applications
? SONET/SDH equipment interconnect, OC-3/SDH STM-1 rate
? Fast Ethernet
? Multimode fber ATM backbone links
 
Description
The HFBR-5961xxZ transceiver from Avago provides the system designer with a product to implement a range of solutions for multimode fber Fast Ethernet and SONET OC-3 (SDH STM-1) physical layers for ATM and other services.
This transceiver is supplied in the industry standard 2 x5 DIP style with an LC fber connector interface with an external connector shield.
 
Transmitter Section
The transmitter section of the HFBR-5961xxZ utilizes a 1300 nm InGaAsP LED. This LED is packaged in the optical subassembly portion of the transmitter section.It is driven by a custom silicon IC which converts di?erential PECL logic signals, ECL referenced (shifted) to a+3.3 V supply, into an analog LED drive current.
 
Receiver Section
The receiver section of the HFBR-5961xxZ utilizes an InGaAs PIN photodiode coupled to a custom silicon transimpedance preamplifer IC. It is packaged in the optical subassembly portion of the receiver.
This PIN/preamplifer combination is coupled to a custom quantizer IC which provides the fnal pulse shaping for the logic output and the Signal Detect function. The Data output is di?erential. The Signal Detect output is single ended. Both Data and Signal Detect outputs are PECL compatible, ECL referenced (shifted) to a +3.3 V power supply. The receiver outputs, Data Output and Data Out Bar, are squelched at Signal Detect deassert. That is, when the light input power decreases to a typical -38 dBm or less, the Signal Detect deasserts, ie. the Signal Detect output goes to a PECL low state. This forces the receiver outputs, Data Out and Data Out Bar to go steady PECL levels high and low respectively.
 
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

ÍøÕ¾µØͼ